Interpoint Product Search: DC-DC Converters

Interpoint's MFL Series of DC/DC converters powers your system with up to 65 watts of output power in single or dual output configurations. The current sharing feature permits up to three units to be paralleled for a total output power of 180 watts. The small package size of 3.0" (76.2 mm) x 1.5" (38.1 mm) x 0.4" (10.16 mm) gives the series an overall power density of up to 45W/in3. The MFL Series meets MIL-STD-704A - D power bus standards as well as MIL-STD-461C CS01 and CS02 susceptibility standards. Protection features include current limiting short circuit protection, undervoltage lockout and soft start. Constructed using thick-film hybrid techniques and sealed in fully hermetic metal enclosures, this series is recommended for use in military, space, aerospace or other applications where size, weight and reliability are critical.
Single or dual output 50 to 65 watts output power Outputs of 5, 12, 15, ±5, ±12 and ±15 VDC Input voltage range of 16 to 40 VDC with transient protection to 50 VDC for up to 50 ms. -55°C to +125°C operation Output ripple as low as 15 mV p-p Input ripple as low as 15 mA p-p Line regulation as low as 2 mV Load regulation as low as 2 mV Efficiencies as high as 87% Current sharing for parallel operation Weight 100 grams maximum Remote sense Synchronization Inhibit Available standard, with "ES" environmental screening, or with full MIL-STD-883 screening Standard Microcircuit Drawing (SMD) models available
	Click here to download the full data sheet. (File size 0 kb) To view this document, you'll need the Adobe Acrobat Reader installed.
	To receive a copy of the full data sheet by fax, contact our DataQuick Fax on Demand System at (425) 861-4687 and enter document 1004.
	To receive a copy of the full data sheet by mail, submit your literature request.


Home	Tour Guide	About Interpoint	Product Search	What's New?	Technical Reference	Sales Support	Careers	Feedback	Literature Request Form

DC-DC Converters
MFL Series