Interpoint Product Search: DC-DC Converters

DC-DC Converters

MHP Series

MHP270 models operate from a MIL-STD-704 nominal 270 volt DC power bus and provide up to 65 watts of output power. As many as 5 units may be paralleled for a total output of nearly 300 watts with true n+1 redundancy. Parallel operation for all loading conditions is supported without requiring external components. MHP converters are built as fully hermetic thick-film hybrids in metal packages measuring 3.0" (76.2 mm) x 1.5" (38.1 mm) x 0.4" (10.16 mm).
Available in single or dual output configurations, MHP270 converters protect your system from damage with safety features including undervoltage lockout, continuous short circuit protection, transient protection, and soft start. External components are not required for operation.

Single or dual output

50 to 65 watts output power

Outputs of 5, 12, 15, 28, ±12 and ±15 VDC

Input voltage range of 160 to 400 VDC with transient protection to 450 VDC for up to 50 ms.

-55°C to +125°C operation

Output ripple as low as 25 mV p-p

Input ripple as low as 15 mA p-p

Line regulation as low as 5 mV

Load regulation as low as 5 mV

Efficiencies as high as 85%

Current sharing for parallel operation

Weight 86 grams maximum

Remote sense

Synchronization

Primary and secondary inhibit

Available standard, with "ES" environmental screening, or with full MIL-STD-883 screening

Standard Microcircuit Drawing (SMD) models available

Click here to download the full data sheet. (File size 0 kb) To view this document, you'll need the Adobe Acrobat Reader installed.

To receive a copy of the full data sheet by fax, contact our DataQuick Fax on Demand System at (206) 861-4687 and enter document 1003.

To receive a copy of the full data sheet by mail, submit your literature request.

Home Tour Guide About Interpoint Product Search What's New? Technical Reference Sales Support Careers Feedback Literature Request Form

MHP270 models operate from a MIL-STD-704 nominal 270 volt DC power bus and provide up to 65 watts of output power. As many as 5 units may be paralleled for a total output of nearly 300 watts with true n+1 redundancy. Parallel operation for all loading conditions is supported without requiring external components. MHP converters are built as fully hermetic thick-film hybrids in metal packages measuring 3.0" (76.2 mm) x 1.5" (38.1 mm) x 0.4" (10.16 mm). Available in single or dual output configurations, MHP270 converters protect your system from damage with safety features including undervoltage lockout, continuous short circuit protection, transient protection, and soft start. External components are not required for operation.
Single or dual output 50 to 65 watts output power Outputs of 5, 12, 15, 28, ±12 and ±15 VDC Input voltage range of 160 to 400 VDC with transient protection to 450 VDC for up to 50 ms. -55°C to +125°C operation Output ripple as low as 25 mV p-p Input ripple as low as 15 mA p-p Line regulation as low as 5 mV Load regulation as low as 5 mV Efficiencies as high as 85% Current sharing for parallel operation Weight 86 grams maximum Remote sense Synchronization Primary and secondary inhibit Available standard, with "ES" environmental screening, or with full MIL-STD-883 screening Standard Microcircuit Drawing (SMD) models available
	Click here to download the full data sheet. (File size 0 kb) To view this document, you'll need the Adobe Acrobat Reader installed.
	To receive a copy of the full data sheet by fax, contact our DataQuick Fax on Demand System at (206) 861-4687 and enter document 1003.
	To receive a copy of the full data sheet by mail, submit your literature request.


Home	Tour Guide	About Interpoint	Product Search	What's New?	Technical Reference	Sales Support	Careers	Feedback	Literature Request Form